1994 GMC C3500 User Comment / Complaint

When vehicle is cold it will not go into reverse. also, vehicle will not go into second or third gear unless consumer releases gas pedal and rpms will come down. dealership was aware of problem.  view

"airbag" warning light stays on while driving and horn does not work. mechanic says the airbag clockspring needs to be replaced. same symptoms as nhtsa action number ea01-007.  view

"airbag" warning light stays on while driving and horn does not work. mechanic says the airbag clockspring needs to be replaced. same symptoms as nhtsa action number ea01-007.  view

While vehicle was moving in reverse at an unknown speed engine suddenly accelerated, and crashed into a parked bus. vehicle accelerated to an unknown speed, and traveled approximately 15 feet before the crash. vehicle has not been examined by a mechanic to determine cause of the problem. consumer experienced back pains since this incident. please provide any additional information / documentation.  view

Vehicle overheats and stalls on highway while driving. vehicle loses all power. this has happened numerous of times. contacted dealer, and dealer worked on vehicle, but has not remedied the problem.  view

During activation of brake system traveling at any speed there is a pulsation in the brakes, there is a squeaking noise, and vehicle pulls to the right. dealership has examined vehicle three times, and failed to remedy the problem. brake rotors and front stabilizer bars have been replaced. consumer stated there was also a possible oil leak, dealer replaced the tie rod to pitman arm and the real pinion seal, also the steering dampner assembly was replaced,and the engine surges at times sometimes hesitates, also there was a leak behind the driver/rear floorboard.  view

During activation of brake system traveling at any speed there is a pulsation in the brakes, there is a squeaking noise, and vehicle pulls to the right. dealership has examined vehicle three times, and failed to remedy the problem. brake rotors and front stabilizer bars have been replaced. consumer stated there was also a possible oil leak, dealer replaced the tie rod to pitman arm and the real pinion seal, also the steering dampner assembly was replaced,and the engine surges at times sometimes hesitates, also there was a leak behind the driver/rear floorboard.  view

During activation of brake system traveling at any speed there is a pulsation in the brakes, there is a squeaking noise, and vehicle pulls to the right. dealership has examined vehicle three times, and failed to remedy the problem. brake rotors and front stabilizer bars have been replaced. consumer stated there was also a possible oil leak, dealer replaced the tie rod to pitman arm and the real pinion seal, also the steering dampner assembly was replaced,and the engine surges at times sometimes hesitates, also there was a leak behind the driver/rear floorboard.  view

During activation of brake system traveling at any speed there is a pulsation in the brakes, there is a squeaking noise, and vehicle pulls to the right. dealership has examined vehicle three times, and failed to remedy the problem. brake rotors and front stabilizer bars have been replaced. consumer stated there was also a possible oil leak, dealer replaced the tie rod to pitman arm and the real pinion seal, also the steering dampner assembly was replaced,and the engine surges at times sometimes hesitates, also there was a leak behind the driver/rear floorboard.  view

Soon after purchase, headlight lenses started becoming opaque/fogged in appearance. the headlights of my girlfriend's '92 subaru legacy looked the same. never thought much about it because i lived in a large urban area with well lit streets. was recently transferred to the little city of savannah, ga. noticed that it is hard to see at night. last night someone informed me that i should replace my headlights because they are barely visible. i looked at them and they are extremely dim. called the nearest dealer and the parts manager said that this is a very common problem caused by the cheap plastic used to make the lens for the headlight assembly. it is a little late to be reporting it, but this seems to be a definite safety hazard. was there ever a recall for these headlights?  view