The Car Community - Car Comments and Car Complaints
SAFETY 1ST Comments and Complaints - Safety for SAFETY 1ST
SAFETY 1ST ENSPIRA 22-451 in Fort Wayne, IN
Tl contact owns a 1994 cadillac deville. the vehicle is equipped with a dorel juvenile group safety 1st 22-311 child seat (na). the shoulder straps on the child safety seat constantly detach on their own. the contact was concerned that h...read more / reply »
SAFETY 1ST ALPHA OMEGA ELITE in New Hope, PA
Tl contact owns a dorel safety 1st alpha omega elite 22-269-crk child safety seat. the contact called the manufacturer on october 5, 2007 to request the safety strap kit. she was informed that it should be received within seven to ten wor...
SAFETY 1ST 22-325 CMB GB1B in San Antonio, TX
Tl contact owns a dorel juvenile group safety 1st child seat, model 22-325 cmb gb1b. the contact stated that the shoulder strap unlatched without warning. as of september 18, 2007, the child seat had not been inspected to determine the ca...
SAFETY 1ST 22-325 VIN GB1B in Mishawuka, IN
Tl contact owns a safety 1st 22-311-wall child restraint. the model number was unavailable in the drop down menu at the time of this complaint. while walking and carrying her child seat in the lock position, the handle snapped back toward...
SAFETY 1ST 22-325 CMB GB1B in Badin, NC
Tl contact owns a safety 1st child safety seat. the model # is 22-325 cmb gb 1b and the manufacturer # is l#89b637585. the contact stated that the carrying handle is loose on both sides of the car seat.
SAFETY 1ST DESIGNER 22 in Edmond, OK
The straps on my child's alpha sport 3-phase car seat by dorel juvenile group can be pulled loose without pushing the release. we have been using this carseat for a year, and when i am getting him out of the seat i have noticed that his st...
SAFETY 1ST 22-325 VIN GB1B in Kenasville, FL
Tl contact owns a safety 1st, 22-325 vin gb1b child restraint. the contact stated that her child leaned forward in the safety seat and the latches failed. the child fell from the seat and bruised his nose.
SAFETY 1ST DESIGNER 22 in Cynthina, KY
Tl contact owns a safety 1st designer 22 child restraint. the contact stated that the latch that holds the child in the seat unlatches very easily. the straps become very loose when the failure occurs. the model # is 22-6311.
SAFETY 1ST DESIGNER 22 in Fords, NJ
My grandson has the safety first 22311 infant seat. i recently bought a newer model car which has the latch system, my old car did not.when i attempted to install his car seat in the new car using the latch system, the strap broke off. kee...
SAFETY 1ST 22-325 DTA GB1B in Sall River, MA
Tl contact owns a safety 1st 22-325 dta gb1b child restraint. the contact stated that the shade on the seat continues to fall on the child's head. there were no injuries. the failure occurs every time the seat is used. the manufactured ...
SAFETY 1ST DESIGNER 22 in Eastaboga, AL
I bought a safety 1st car seat/stroller combo from k-mart in december 2006. earlier this month the seams on the car seat cover began to come undone, my 3 month old daughter got her leg caught in the hole, she had red marks on her ankle from...
SAFETY 1ST DESIGNER 22 in Vero Beach, FL
Tl*- the latch strap from the base came apart from a safety 1st child safety seat. the contact lifted the child safety seat in order to transfer it to another vehicle and that's when the latch strap came off the child safety seat. the chi...
SAFETY 1ST DESIGNER 22 in Muskogee, OK
The top latch strap provided on this seat cannot be tightened firmly against the vehicle seat. rather than provide a (normal) tensioning device for the top strap, the manufacturer elected to provide a dual loop steel plate. the strap is thr...
SAFETY 1ST DESIGNER 22 in Conord, NH
Tl* - the contact has a safety 1st child seat model number 22-311 and the shoulder harness buckle dose not stay locked. the contact stated that she would lock the harness buckle, but it continues to unlatch. the contact doesn't know why ...
SAFETY 1ST DESIGNER 22 in Miami, FL
Dt*: the contact stated while the trying to release the child from the car seat the handle snapped back injuring the child. the car seat has not been replaced or repaired.
SAFETY 1ST 01948MLO in Terrell, TX
Dt*: the contact stated the child pulled harness straps through the safety latches in the back of the safety 1st child safety seat, model number 01948ml0. this caused the harness to become unlatched from the seat.
SAFETY 1ST 02-620AZY in Mahanoy, PA
Dt: the contact stated the child seats straps come out of the back of the seat and continue to loosen without staying in place
SAFETY 1ST 22-325 CMB GB1B in Washington, IA
Dt*: the contact stated the safety belt of the five point harness on the child seat detaches or becomes loose.
SAFETY 1ST DESIGNER 22 in Springfield, MO
Child safety seat is a dorel model, safety 1st, 22-561-wal, 4/2/04 date of manufacture. child safety seat latch was manufactured with a twist in belt. hook was sewn on backwards. advised parent to contact manufacturer and get part replac...
SAFETY 1ST 02-620AZY in Plainfield, IL
I am a certified cps technician. i was helping a father install a safety 1st intera forward facing using the latch system in the center rear position of his 2003 chevy impala. after the install, i tightened and loosened the harness to ens...
SAFETY 1ST ALPHA OMEGA ELITE 22-455 in Mechanicsville, MD
Consumer complaint regarding molding holding bar to attach base to child safety seat. safety 1st alpha omega elite deluxe 3 in 1, model 22-455-wal.
SAFETY 1ST DESIGNER 22 in Indpls, IN
My child's stroller/car seat combo wheels on the stroller have fell off six times and the car seat acts like it wants to break and my child only weighs 14 1/2 pounds.
SAFETY 1ST 22-325 DTA GB1B in Pennsacola, FL
Dt: contact states the webbing on the sea tbelt shoulder harness keeps coming loose .
SAFETY 1ST DESIGNER 22 in Inkom, ID
The straps on my baby's car seat do not tighten easily. repeated tightening of the straps led to plastic fatigue on the piece that connects to the straps. we had two of these car seats with my first child. with the first one, dorel juven...
SAFETY 1ST DESIGNER 22 in Tremonton, UT
Dt: the problem began while taking the child out of the car seat, the strap will loossen and come all the way out of the back of the car seat.
SAFETY 1ST DESIGNER 22 in Jackson, WI
Dt:purchased a car seat 12-15-04. 2 weeks ago, as the carrier was put in the base, there was a gap between the carrier and base. there was a three inch gap between carrier and base. carrier did not snap into base correctly. at times carri...
SAFETY 1ST DESIGNER 22 in Dexter, NM
Dorel juvenile group safety first model # 01-929, dom 07-28-2004. rear adjuster lock for tightening the harness straps came loose. manufacturer was not notified.
SAFETY 1ST DESIGNER 22 in Hartland, WI
Carseat complaint - safety 1st model 22-501-wal the cover of this carseat is padded with foam easily accessible by toddlers and small children. my son went through a period where he picked at the seat while i was driving and ate pieces or...
SAFETY 1ST 02-621SAL in Easley, SC
Safety 1st, model 22560flg, dom 11/13/2003; when child is in the child seat and latched in, but when the button is pressed, it failes to release. it takes approximately 15 to 20 minutes to get it unlatched. the problem started to occur on...
SAFETY 1ST DESIGNER 22 in North Attleboro, MA
I realize i am most likely in the wrong dept, however this is as close to a complaint dept. as i have found. please forward appropriately. thank you! i feel it is imperative to bring to ford's attention that a former employee, dennis gerar...
SAFETY 1ST 02-620AZY in Big Sandy, TN
After buying a brand new safety 1st forward facing/booster for up to 100lbs. for my son, i went home to install it. i read the instruction manual, then i placed it in my 92 chevy astro van, tightened the straps, and put the locking clip on,...
SAFETY 1ST DESIGNER 22 in Edwardsville, IL
Safety first designer 22 infant car seat is so defective in design and difficult to use as to be an inherently dangerous product. 1) the releases for the carrying handle are excessively tight, one adult pressing on each side will often not...
SAFETY 1ST 02-621SAL in Dalzell, SC
Unable to secure avg size newborn in a cosco safety 1st carrier seat. model 02-621 sal, manufacture 12/02. harness straps extremely long even in tightest position. need to be able to tighten more (4-5"). do you have any acceptable modific...
SAFETY 1ST 02-621SAL in Dalzell, SC
Unable to secure avg size newborn in a cosco safety 1st carrier seat. model 02-621 sal, manufacture 12/02. harness straps extremely long even in tightest position. need to be able to tighten more (4-5"). do you have any acceptable modific...
SAFETY 1ST DESIGNER 22 in Erie, PA
Safety 1st model # 02925brd, dom 9-8-2001, harness retractor keeps loosening up after being adjusted to fit child, child can get out of seat.
Keywords:
SAFETY 1ST Comments and Complaints, Safety Comments and Complaints SAFETY 1ST, SAFETY 1ST Vehicle Safety Comments and Complaints, Comments and Complaints SAFETY 1ST, SAFETY 1ST Comments and Complaints, Vehicle Comments and Complaints SAFETY 1ST, SAFETY 1ST Comments and Complaints Vehicle Page Description: SAFETY 1ST Comments and Complaints - Vehicle Safety Comments and Complaints Information for SAFETY 1ST |
SEND TO FRIEND
LEAVE COMMENT
