The Car Community - Car Comments and Car Complaints
HARLEY DAVIDSON FLHR Comments and Complaints - HARLEY DAVIDSON FLHR
2005 HARLEY DAVIDSON FLHR in Mesa, AZ
Motorcycle road trip - checked tires. rear metzeler me880 1.50/80hb16 - made in brazil. delamination - underlying plies exposed. known problem by metzeler with brazilian manufactured tires. metzeler is distributing defective and dangero...read more / reply »
2007 HARLEY DAVIDSON FLHR in Pascoag, RI
Tl contact owns a 2007 harley davidson flhr. while driving 65 mph, the handle bar pulled to the left and right and caused the vehicle to move from lane to lane. the dealer stated that the bearings needed to be tightened and they made the ...
2007 HARLEY DAVIDSON FLHR in Ruther Glen, VA
2007 harley davidson road king standard. the transmission/or drivetrain makes a whirling and clattering sound in 5th gear and some in 6th at highway speeds. i took to dealer for service and to investigate. i was told it was normal and there...
1995 HARLEY DAVIDSON FLHR in Erie, PA
Dt*: the contact stated that the motorcycle chassis and frame rusted and fractured in several places without incident. the motorcycle was not exposed to any harsh weather elements or road salts. the motorcycle was inspected by a dealer w...
1999 HARLEY DAVIDSON FLHR in Claremont, NH
I am the original owner of a 1999 harley road king/fl family cycle. i have had the rear fork swing arm break at the axle through hole slot almost putting me in the bushes. the swing arm is made of 1/8x1x2 inch rectangular structural tubing ...
2005 HARLEY DAVIDSON FLHR in Hudson, NH
Dt*: the contact stated while driving 55 mph, the rear wheel vibrated. the vehicle was taken to the dealer for inspection. the dealer tightened the spokes on the wheels. that remedied the problem for a short amount of time. however, th...
1997 HARLEY DAVIDSON FLHR in Moreno Valley, CA
This is in reference to a wheel on a motorcycle that came apart. i have the wheel and can send pics of same. the wheel was manufactured @ 1997 by american wire wheels, which is now dayton wheels. the side edge of the wheel broke loose from...
2001 HARLEY DAVIDSON FLHR in Youngsville, NC
I own a 2001 harley davidson flhr, i had just taken a trip from north carolin to ohio,with a friend who was riding also. his bike , a 2004 halrey davidson flhr. upon our travel through the west virginia turnpike on a couple of long sweeping...
2001 HARLEY DAVIDSON FLHR in Spring Hill, FL
While riding my 2001 harley road king (flhr) on two separate times as we were riding down the motor died. prior to that on the first time before we started off the bike would not start, i only heard the sound of a relay clicking so i put in...
2003 HARLEY DAVIDSON FLHR in Evansville, IN
The rear brake lights failed without warning. the dealer inspected and determined that the bulbs didn't fail but diagnosed the problem as defect in the bulb socket. the dealer didn't have the newly designed bulb socket. the dealer bent t...
2002 HARLEY DAVIDSON FLHR in Littleton, CO
Bike pulls extremly hard to left. could only be partially solved by moving engine over in frame. can not be told by dealer or hd if this is within factory specs. have had in several times with no resolve. spoke with someone at factory and w...
2001 HARLEY DAVIDSON FLHR in Tonawanda, NY
Drive belt suddenly broke when accelerating in 2nd gear. had rider passenger in moderate traffic.
2002 HARLEY DAVIDSON FLHR in Winchester, OH
Design of throttle body is not done properly, when motorcycle vibrates throttle body will come loose and rpms will start to rev up. contacted dealer. harley davidson is aware of the problem and has a remedy, the original screws on the thro...
1999 HARLEY DAVIDSON FLHR in Mystic, CT
Rear cam bearing failed creating lod grinding noise. shut down engine and gave to dealer.cam bearing replaced with same type of roller bearing not updated version .now at 14500 miles engine is begining to make same noise again.notified har...
1999 HARLEY DAVIDSON FLHR in Helena, MT
1999 harley davidson 88 cubic inch twin cam engines have a known problem with cam bearings. many of the bearings are failing causing the engine to seize, die or stall causing a hazard to the rider and passenger. harley davidson is aware o...
1999 HARLEY DAVIDSON FLHR in Longmont, CO
Original equipment ie. (factory cams and cam bearings) replaced with stage 1 performance cams and new bearing sets at approx. 10,000 miles through the original dealership.
1999 HARLEY DAVIDSON FLHR in Carson City, NV
Front tire (dunlop elite) is unstable; causing front tire to wooble while driving at highway speed of 70-75 mph. dealer notified and replace tires. making a report to nhtsa on this matter.
1999 HARLEY DAVIDSON FLHR in Foster City, CA
While driving about 20 mph engine cam bolt sheared off, causing sudden engine siege. the bolt has been replaced by the dealership.
1999 HARLEY DAVIDSON FLHR in Bealeton, VA
Pashanger floor boards are designed to extend beyond the crash bars when the bike is laid on its side. the bike fellover and the floor board folded and the weight of the bike broke the rider's ankle.
Keywords:
HARLEY DAVIDSON FLHR Comments and Complaints, Safety Comments and Complaints HARLEY DAVIDSON FLHR, HARLEY DAVIDSON FLHR Vehicle Safety Comments and Complaints, Comments and Complaints HARLEY DAVIDSON FLHR, HARLEY DAVIDSON FLHR Comments and Complaints Page Description: HARLEY DAVIDSON FLHR Comments and Complaints - Vehicle Safety Comments and Complaints Information for HARLEY DAVIDSON FLHR |
SEND TO FRIEND
LEAVE COMMENT
